Filter
Top Products
English _33
●
NETWORK CONNECTION AND SETUP
Select : <Network Neighborhood>
<Properties>
<Local Area Connection>
<Properties>
<General>
<Internet Protocol (TCP/IP)>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1
IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1
For the address of the IP router, refer to the product’s documentation.
CONNECTING THE CAMERA DIRECTLY TO A DHCP-
BASED XDSL/CABLE MODEM
Setting the IP Router
This is enabled for a modem using DHCP.
Set the Static or Dynamic IP address. (pages 36~41)
Launch an Internet browser on the local PC connected to the IP Router.
Enter the IP Router’s address in the address bar of the browser.
ex) http://192.168.1.1, http://192.168.0.1
or http://192.168.xxx.1
For the DDNS URL address, refer to "To check the DDNS address". (page 43)
M
1.
2.
3.
xDSL 또는
Cable 모뎀
외부 원격 PC
DDNS 서버
(Data Center, KOREA)
SNB-3000
External Remote PC
DDNS Server
(Data Center, KOREA)
xDSL or
Cable Modem
INTERNET