English _55
● SETUP SCREEN
SYSTEM SETUP
To set the date/time
You can obtain the current system time from the NTP server or your PC for your time
setting.
Select <System> - <Date & Time>.
The Date & Time setup window
appears.
If you select Manual, input the date and
time manually.
Your settings will be saved.
Current system time : The specified
time in System Time Setup will be
applied.
System time setup : You can synchronize the system time with the NTP server (time
server) or your PC, or specify it manually.
You can specify the time between January 1, 2000 and December 31, 2037.
To set the system time
Select a desired address in <Address>
or select <Synchronize with PC
viewer>.
If you select Manual, input the date and
time manually.
Click [Apply].
The specified system time will be applied.
<NTP Server IP> is provided by a public agency, the list of which is subject to change from time
to time.
In a local network, a separate NTP server must be manually defined.
The current time can vary depending on the computers regional (GMT and DST) and country
(PC time configuration) settings.
1.
2.
M
1.
2.
3.
M
J