Filter
Top Products
2928
Installation
Installing the SPD-1000 Wall Mount
1. Prepare the accessories in the camera box (power adapter, BNC auxiliary cable, 1
loose-proof screw, 2 installation brackets, installation cover) and the wall mount
(STB-280PW or STB-230PW) and 3 installation bracket fixing screws in the mount
packaging box.
2. Fix the wall mount (STB-280PW) with 3 screws to
the wall where the camera is to be installed, as
shown in the figure on the right.
power adapter(DC 12V, Peak 4A) BNC auxiliary cable
2 installation brackets
installation cover
STB-280PW
STB-230PW
1 loose-
proof screw
*Precautions before Attaching the Installation Template
• Installation Place: Check that the function and performance of the camera installed on the wall will not be
adversely affected by the external environment, and that the ceiling can adequately support the weight of the
camera.
• Installation Direction: Determine the main direction of the camera in advance and attach the template so that
the front of the template is in line with the camera direction.
• Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to
stand below the installation area.
Notes
3. Fix the wall bracket and the wall surface attachment installation bracket onto
the wall mount (STB-280PW) with the screws supplied, as shown in the
figure on the right, and connect the external incoming cables (video cable,
controller cable and power cord) to the camera.
4. Assemble the camera, which should already have been attached to the product
installation bracket, to the wall attachment installation bracket, facing forwards, and
fix the camera with the supplied fixing screw.
Wall
Wall
Wall