Filter
Top Products
Installation
3130
5. To complete installation, rotate the installation cover along the groove of
the ceiling attachment bracket, and fix it.
Installing the Dome Housing (STH-1000PI)
To install the Dome Housing (STH-1000PI), fix it instead of installing the cover
in the last step “Installing the SPD-1000 on a Ceiling” on page 26 and “Installing
the SPD-1000 Wall Mount” on page 28.
Installing the Outdoor Housing (STH-1000PO)
To install the outdoor housing, refer to the SPEED DOME CAMERA ACCESSORY
user manual.
PTZ camera can be set up on the OSD (On Screen Display) menu displayed on the video
monitor by the camera controller. The joystick operations in the OSD menu are as follows. In
addition, sending control codes to the camera from the PC can also use the camera functions.
P1 P2 P3 P4 Defaults
Focus Mode Auto/Manual/One Shot AF One Shot AF
Zoom Tracking
Mode On/Off ON
Speed Slow/Fast Fast
Digital Zoom Off(2~10X) OFF
AWB Mode
ATW/AWC/MANUAL ATW(O)
ATW
-ATW(I): Indoor -ATW(O): Outdoor
Manual 29
-Red -Blue 41
Brightness 25 025
Iris
Auto Auto
Manual Iris Level 100
Shutter
--- ESC
A.FLK
Manual
1/60(1/50)~1/120,000, x2~x128
1/60(1/50)
Sens-Up
Auto Sens-Up Limit x2~x128 x4
Off
High/Middle/Low/Off OFF
AGC High/Normal/Off Normal
SSNR High/Middle/Low/Off Low
Auto
B/W
Color Burst Level 060
Sync Internal
Image Adj. Sharpness 008
Others Color 050
Freeze On/Off OFF
Position Ceiling/Desktop Ceiling
Exposure
Day & Night
Back Light
White
Balance
Camera
Setting
Focus
OSD Menu Organization
Functional Description
Menu Function Menu Function
TILT UP Move up on the OSD menu PAN LEFT Move left on the OSD menu
TILT DOWN Move down on the OSD menu PAN RIGHT Move right on the OSD menu
• When the Dome Housing is
installed on the wall
• When the Dome Housing is
installed on the ceiling
Wall
Wall
on the ceiling