Filter
Top Products
98
ENGLISH
Precautions
Installation by unqualified
persons is not recommended.
Experienced and skilled technicians have to install
this product. Unqualified and personal installation
may cause fire or electric shock. Contact the dealer
for installation.
If any unusual odors or smoke comes
from the camera, stop using the product.
Do not install the product under humid conditions
or near flammable or explosive gases.
Install the product in a place strong
enough to hold it.
Do not handle the power plug
with wet hands.
It may cause electric shock.
Do not disassemble or insert
foreign objects.
It may cause failure or electric shock.
It may cause fire.
Do not use the camera under extreme temperatures (below -
10° or above +50°). It may cause poor image quality or
failure. Be especially careful to provide ventilation when
operating the camera under high temperatures.
Do not install the camera under severely
changing lighting environments such as
fluorescent lamps. It may cause the camera
to work improperly.
Never drop the camera or subject
it to severe shocks or vibrations.
It is the most important part of camera. Be
careful not to mark it with fingerprints.
Do not install the camera where it might
be exposed to rain, water or spillages.
If the camera gets wet, it may cause failure.
Do not aim the camera at the sun
or any other strong light source.
Do not touch the front glass of
the camera.
It may cause failure, electric shock or fire. The product may fall.
It may cause failure. It may cause fatal damage to CCD device or
internal circuit.
Do not install the product in too
hot or too cold environments.
Do not install the camera in
intermittent lighting environments.