Filter
Top Products
4544
Functional Description
Group SEQ: Sequence surveillance can be executed and set up and data can be
deleted. Up to 6 groups can be registered.
Swing SEQ : Swing surveillance can be executed and set up and the data can be
deleted.
Pan Swing : Swing surveillance for the Pan direction is executed and set up. Data
is deleted.
Tilt Swing : Swing surveillance for the Tilt direction is executed and set up. Data is
deleted.
P&T Swing: Swing surveillance both for the Pan and the Tilt directions are
executed and set up simultaneously. Data is deleted.
* Setting : The Preset Position for Swing function is selected with the joystick and confirmed
with the Execution key. SPD is the moving speed (01-64step). DWL is the stop time
(00-120sec). Press the Execution key in the location with selection mark to finish
the setting process.
* Execute : Swing surveillance is executed. Stop key designates this function.
* Clear : Data in the Swing function is deleted.
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Group SEQ
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Setting : Preset position for swing is selected with the joystick and confirmed with
the Execution key. SPD is the moving speed (01~64 step). DWL is the
stop time (00~120sec). Press the Execution key in the location with
selection mark to finish the setting process.
Execute : Swing surveillance can be executed. Stop key will stop this function.
Clear : Swing data can be deleted.
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Swing SEQ
Pan Swing
Tilt Swing
P&T Swing
Tour : Group surveillance can be executed and set up and data can be deleted.
Setting : The registered Group Sequence is selected with the joystick and
confirmed with the Execution key. If the selected number is not
registered, it cannot be input. Press the Execution key in the location
with selection mark to finish the setting process.
Execute : Group surveillance is executed.
Clear : Group surveillance data are deleted.
Sequence Setting Tour SEQ
Setting
Execute
Clear
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Scene Adj. [001]
Shutter ---
AGC Normal
SSNR LOW
Sens-Up AUTO
White Balance ATW(OUT)
• In the White Balance setting of the individual Preset Scene Adj., the AWC selection
is not available.
Notes
6. If you select the Scene Adj. item, such items
as Shutter, AGC, SSNR, Sens-Up, White
Balance can be set up differently in every
Preset item.