Filter
Top Products
Getting to Know Your Camcorder
OSD (On Screen Display)
ENGLISH
13
j. Time (see page 42)
Shows the time the recording was made.
k. Title (see page 44)
Shows the title of the recording. It is superimposed on the scene.
l. Self diagnosis (see page 64)
(TAPE!, TAPE END!,
PROTECTION!) Checks the operation of the Camcorder.
m. DSE (Digital Special Effect) (see page 40)
Indicates the DSE mode is activating.
The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.
n. White Balance mode (see page 49)
Indicates the White Balance mode is activating.
The White Balance modes are AUTO, INDOOR
()and OUTDOOR().
o. Tape counter
Indicates amount of the tape used.
p. Operation mode
Indicates the operation mode is activating.
The operation modes are STBY, REC , STOP, PLAY
( ), FF( ), REW( ), EJECT.
q. Hi8 (VP-L800/L850/L850D/L870 only ) (see page 54)
Indicates the use of the Hi8 tape in CAMERA or PLAYER modes.
In case of not being tape, display Hi8 on the screen in CAMERA or PLAYER modes.
r. DEW
( ) condensation (see page 67)
Monitors the moisture condensation.
s. Digital zoom (see page 31)
Indicates the digital zoom is active.
t. Snap Shot (VP-L850/L850D/L870 only) (see page 48)
Shows the remaining available space for Snap Shots.
u. Z.RTN (VP-L850/L850D/L870 only) (see page 55)
Shows when the zero return is acivated.
v. PB DSE (see page 57)
Shows that the PB DSE mode is active.
w. VOLUME (see page 56)
x. EASY & CUSTOM
Shows when the easy or custom mode is active.
y. LIGHT (VP-L850/L850D/L870 only)
Shows when the Light is switched on.
z. Remocon ( OFF) (VP-L850/L850D/L870 only)
Indicates the remocon off mode is activated.
00607F VP-L800-UK(1-19) 2/17/03 11:17 AM Page 13