Filter
Top Products
ENGLISH
64
Troubleshooting Check
Troubleshooting Check
✤ Before contacting a service centre, perform the following simple checks.
They might save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Inform that... Action
slow the battery pack is almost discharged. Exchange it with a charged one.
fast the battery pack is fully discharged. Exchange it with a charged one.
TAPE END!
slow the tape has almost reached its end. Prepare a new one.
TAPE END! no the tape reached its end. Change to a new one.
TAPE! slow there is no tape in the camcorder. Insert a tape.
PROTECTION!
slow
the tape is protected from recording. Check the red tab on the tape
is not pushed over the hole.
D.EMG slow the camcorder has some 1. Eject the tape.
C.EMG mechanical fault. 2. Set to OFF.
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your local
service centre if the problem
continues.
slow
moisture condensation see page 67.
has formed in the camcorder.
00607F VP-L800-UK(46-69) 2/17/03 11:20 AM Page 64