Filter
Top Products
ENGLISH
54 54
Playing back the Tape
Notes:
■ VP-L800U/L800/L850/L850D/L870 feature a monaural audio system.
If your TV or VCR are stereo, connect the audio cable to the input “L” of TV or VCR.
■ You can use an S-VIDEO cable to obtain better quality pictures if you have the S-VIDEO connector on your TV.
■ Close the LCD panel while viewing playback on a TV screen in order to avoid picture distortion.
PLAYER
PLAY/STILL
Playback
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect a power source (battery or AC Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.
3. Insert the tape you want to watch.
■ Make sure that STOP is displayed.
4. Press the (PLAY/STILL) button.
■ The picture should appear on the TV after 2 to 3 seconds.
■ Press
■ (STOP) to stop playing.
■ If the tape reaches its end during playback, the tape
will rewind automatically.
Notes:
■ Vibration from the built-in speaker can cause picture distortion.
■ It is best to turn the built-in speaker off when your camcorder is connected to the TV.
■ The playback system (Hi8/8mm) is selected automatically, depending on the tape format.
■ VP-L800/L850/L850D/L870 can playback both Hi8 and 8mm.
■ This camcorder does not support LP recording and playback.
00607F VP-L800-UK(46-69) 2/17/03 11:20 AM Page 54