Filter
Top Products
ENGLISH
43
Advanced Shooting
7. Press ENTER.
■ The month setting will blink.
8. Turn the UP/DOWN dial to set the desired month.
9. Press ENTER.
■ The day setting will blink.
10. You set the day, hour and minute by following the same
procedures used for setting the year and month.
11. Pressing ENTER after setting the minutes causes the clock setting screen to
disappear. The entered date and time will then be displayed.
Recording a DATE/TIME
1. Make sure that you have set the DATE/TIME.
2. Set the power switch to CAMERA mode. (see page 18)
■ Open the LCD display and adjust it as necessery.
3. Press the DATE/TIME button the required number of times.
■ To record the date only, press the DATE/TIME button once.
■ To record the date and time, press the DATE/TIME button twice.
4. Press the START/STOP button to start recording with the DATE/TIME in your recording.
Notes:
■ If your date and time settings are not maintained in the camcorder, it means the LITHIUM BATTERY is
discharged and should be replaced. (see page 17)
■ You cannot hide the recorded date or time during playback.
■ The DATE/TIME function will not operate in EASY or CUSTOM mode.
CLOCK SETTING
0:00
29.AUG. 2005
EXIT:MENU
CLOCK SETTING
0:00
29.SEP.2005
EXIT:MENU
CLOCK SETTING
0:00
29.SEP.2005
EXIT:MENU
00607F VP-L800-UK(20-45) 2/17/03 11:19 AM Page 43