Filter
Top Products
ENGLISH
Basic Shooting
29
Adjusting the LCD during PLAY
The procedure for adjusting the LCD display in PLAYER mode is the same as that for adjusting it in CAMERA mode,
except that the power switch must be set to PLAYER instead of CAMERA.
Please refer to page 26.
Controlling the sound from the speaker
✤ You can hear your video’s audio track through the
built-in speaker when using the LCD display for playback.
✤ The speaker’s volume is controlled by the
UP/DOWN dial on the camcorder.
✤ The speaker will not work if the LCD display is closed.
✤ If the speaker does not work properly, check the following:
■ Is the LCD monitor closed?
■ Is the volume level adjusted correctly?
■ Is the speaker switched off? (see page 56)
Notes:
■ Lower the volume if vibration from the built-in speaker causes screen disturbance.
■ The Volume settings will automatically disappear 2 seconds in no further adjustments are made.
Viewing a Still Picture
■ Press (PLAY/STILL) button during playback.
■ To resume playback, press the (PLAY/STILL) button
again.
Picture Search
■ Keep pressing (FF) or (REW) button during playback.
■ To resume normal playback, release the button.
PLAY/STILL
REW
FF
00607F VP-L800-UK(20-45) 2/17/03 11:18 AM Page 29