Samsung VP L 900 Camcorder User Manual


 
¿Qué duración tendrá la batería para filmar?
Depende de la frecuencia con que se emplee el zoom.
Prepare tantas baterías como sea posible
Recarga de la batería
1. Conecte la batería a la
videocámara.
2. Conecte el adaptador de corriente
AC a un cable AC y conecte el cable
a una toma de pared.
3. Conecte el cable DC a un conector
de corriente continua de la
videocámara.
4. Apague la videocámara y el
indicador de recarga comenzará a
parpadear y comenzará la carga.
- Parpadeo una vez por segundo:
Indica que se ha cargado menos
del 50%.
- Parpadeo dos veces por
segundo: Indica que se ha
cargado el 50%~75%.
- Parpadeo tres veces por segundo: Indica que se ha
cargado el 75% ~ 100%.
- Se detiene el parpadeo y la luz es continua:
Se ha completado la recarga.
- Encendido y apagado cada segundo: Indica algún error.
Vuelva a colocar la batería y el cable DC.
5. Si se ha completado la recarga, separe la videocámara,
el adaptador de corriente y la batería.
Incluso si se ha apagado la cámara, se descargará la
batería.
Nota: La batería puede estar parcialmente cargada
en el momento de la compra.
Uso de la batería
How long will the battery last for shooting?
Depends on how often you are likely to use the zoom
feature during recording.
Recharging the Battery Pack
1. Attach the battery pack to the
camcorder.
2. Connect the AC Power Adapter to an
AC cord and connect the AC cord to a
wall socket.
3. Connect DC cable to DC jack of the
camcorder.
4. Switch the camcorder off.
The charging LED next to the DC IN
socket will start blinking to indicate the
battery is charging
- Flashing once a second: The
battery is less than 50% charged.
- Flashing twice a second: The
battery is 50%~75% charged.
- Flashing three times a second:
The battery is 75%~100% charged.
- Constantly on: Charging is complete.
- On for a second and off for a second: There is an error
and the charger needs to be reset. Remove and replace
the DC supply to the camera. If the problem continues,
contact the nearest service agent.
5. If recharging is completed, separate the camcorder,
AC power adapter, and battery pack.
Even if the power is turned off, battery will be discharged.
Note:
The battery pack may be slightly charged at the time of
purchase.
Preparing
ESPAÑOLENGLISH
19
Configuración de la videocámara
1
4
2 3
OFF
To use the Battery Pack
00732F VP-L900-UK+ESP (1-19) 3/23/04 11:19 AM Page 19