Filter
Top Products
✤ Before you begin: Make Sure that there is no tape inserted in the Camcorder. (see page 36)
✤ Demonstration automatically shows you the major functions that are included with your
Camcorder so that you may use them more easily.
✤ The Demonstration function may only be used in the Camera mode without a tape inserted in
the Camcorder.
✤ The Demonstration operates repeatedly until the Demonstration mode switched Off.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
3. Press the MENU button.
■
The menu list will appear.
4. Move the Menu selector to the left or right to select System, then press the Menu selector.
5. Move the Menu selector to the left or right to select Demonstration, then press the
Menu selector.
6. Move the Menu selector to the left or right to select On, then press the Menu selector.
7. Press the MENU button.
■
The Demonstration will begin.
8. To quit the Demonstration, press the MENU button.
[ Notes ]
■
The Demonstration mode is automatically activated when the Camcorder is left idle for more than
10 minutes after switching to the Camera mode (no tape is inserted in the Camcorder).
■
If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode,
the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other
functions.
■
While setting the NITE PIX to ON, the Demonstration function does not work.
ENGLISH
System Menu Setting
3131
Viewing the Demonstration
Move Select Exit
MENU
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
Off
On
Camera Mode
√System
Clock Set
Beep Sound
Language
Demonstration
√On
√English
√On
Move Select Exit
MENU
1
4
6
Samsung Camcorder is...
Demonstration
[Digital Camcorder]