Filter
Top Products
✤ The Date/Time function works in Camera/Player/M.Cam/M.Player modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE or MEMORY CARD. (VP-D353(i)/D354(i)/D355(i) only)
3. Press the MENU button.
■
The menu list will appear.
4. Move the Menu selector to the left or right to select Display, then press the Menu selector.
5. Move the Menu selector to the left or right to select Date/Time, then press the Menu selector.
6. Move the Menu selector to the left or right to select the display type of the Date/Time,
then press the Menu selector.
■
Display type of the Date/Time: Off, Date, Time, Date&Time
7. To exit, press the MENU button.
[ Notes ]
■
The Date/Time will read 00:00 1.JAN.2005 in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the Date/Time in the Camcorder.
- When the Lithium battery becomes weak or dead.
■
Before you use the Date/Time function, you must set the clock. See Setting the Clock on page 27.
Move Select Exit
MENU
Camera Mode
√Display
LCD Bright
LCD Colour
Date/Time
TV Display
4
3333
ENGLISH
Display Menu Setting
Displaying the Date/Time
Move Select Exit
MENU
Camera Mode
Back
LCD Bright
LCD Colour
Date/Time
TV Display
Off
Date
Time
Date&Time
1
√Off
√On
6