Samsung VP-D351(i) Camcorder User Manual


 
ENGLISH
8585
USB Interface (VP-D352(i)/D353(i)/D354(i)/D355(i) only)
To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
You can use this Camcorder as a PC CAMERA.
When you connect to a Web site that provides video chatting functions, you can use your Camcorder for such functions.
When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to
enable voice communication.
Using the Camcorder with PC Net-meeting program installed, you can participate in video conference.
The PC CAMERA's screen size (Transferred video frame rate for the PC Camera function is max 15 fps.)
320X240 (QVGA) pixels for USB 1.1 connection.
If PC is connected with the USB to the Camcorder, only the Power, Mode, Zoom and NITE PIX switches can be operated.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to
the USB connector on your computer.
Using the PC Camera Function
1
2