Filter
Top Products
ENGLISH
Playback
7777
✤ The Audio Dubbing function works only in Player Mode.
✤ You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone(not supplied) or other audio equipment.
✤ The original sound will not be erased.
1. Set the Power switch to PLAYER.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
3. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the remote control.
■
Audio Dubbing icon ( ) will be displayed on the LCD screen.
■
The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
■
Press the (STOP) button to stop the dubbing.
[ Notes ]
■
You can not use the Audio Dubbing function while playing a write protected video tape.
■
To utilise an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect
external sound source input.
■
To dub an external sound source, set the AV In/Out function to In (VP-D353i/D354i/D355i only). (see page 76).
Dubbing Sound
Audio Dubbing (VP-D353(i)/D354(i)/D355(i) only)
DV
USB
AV
MIC
√
1
3 4 5