Filter
Top Products
47_ English
臺灣
_47
DISC FINALISE
( (
-R
+R DL
))
• This function works only in the Record mode
page 21
• To play the contents of a DVD-RW/-R/+R DL on other DVD players/
recorders/drives, you must fi nalise the disc.When fi nalising, there should be
enough power in the batteries. If the AC power adaptor is to be used, make
sure that the jack is properly connected. A power cut during fi nalising may
disrupt the disc from replaying.
1. Slide the POWER switch downwards to turn on the power.
page 21
2. Set the Storage mode switch to DISC.
(VP-DX103(i)/DX104/DX105(i) only)
page 30
3. Press the MENU button, then move the Joystick right or
left to select “Disc Manage.”
4. Move the Joystick up or down to select “Disc Finalise,”
then press the Joystick.
• You can simply fi nalise the disc using the
FINALIZE
button on the DVD camcorder.
5. The message “DVD needs to fi nalise for other DVD
player or recorder to be played. But no more recording
is allowed after fi nalising.” will appear. Move the Joystick
right or left to select “Next,” then press the Joystick
.
• Disc information will appear.
6. Move the Joystick right or left to select “Execute,” then
press the Joystick.
• To exit, use the
Joystick to select “Exit,” the press
the Joystick.
7. Move the Joystick right or left to select “Yes,” then press
the Joystick.
• The message showing that the disc is being fi nalised
will appear.
WARNING
During fi nalising, do not cause impact or vibration
to your DVD camcorder. This could cause a
malfunction.
• The fi nalise function is not available at the battery
level under (
).
• Once fi nalised, the movie images or a playlist in the
disc cannot be deleted or edited.
• Time required for fi nalising may differ by disc type.
• Refer to page 8 for fi nalised disc compatibility.
• Playback is not guaranteed in all DVD players/
recorders/drives. For compatibility details, refer to
your DVD players/recorders/drives owner’s manual.
• Once the DVD-R/+R DL disc is fi nalised, you cannot
re-record it in the DVD camcorder.
• You may play back DVD+RW discs on other devices
without fi nalising them.
• You cannot make an additional recording on a DVD-
RW disc without unfi nalising it after it is fi nalised.
DVD camcorder mode:
disc manage
DVD
攝錄放影機模式：
光碟管理
光碟終結
( (
-R
+R DL
))
• 此功能僅能在錄製模式下操作。
第 21 頁
• 要在其他 DVD 播放機/ 攝錄放影機/磁碟機上播放 DVD-RW/-R/+R DL 的內容，
您必須終結此光碟。在終結時，電池應該具有足夠的電源。如果要使用交流電源
適配器，請確保插孔連接正確。在終結時斷開電源可能會中斷光碟的重新播放。
1.
向下滑動
POWER
開關以開啟電源。
第 21 頁
2.
將
儲存模式
開關設定為
DISC
。
( 僅適用於 VP-DX103(i)/DX104/DX105(i)）
第 30 頁
3.
按下
MENU
按鈕，然後向右或向左移動
搖桿
以選擇「
Disc
Manage
」。
4.
向上或向下移動
搖桿
以選擇「
Disc Finalise
」，然後按下
搖桿
。
•
您僅需使用 DVD 攝錄放影機上的
FINALIZE
按鈕來終
結此光碟。
5.
將會出現訊息「
DVD needs to fi nalise for other DVD
player or recorder to be played.
But no more recording
is allowed after finalising.」
。向右或向左移動
搖桿
以選擇
「
Next
」，然後按
搖桿
。
• 將顯示光碟資訊
。
6.
向右或向左移動
搖桿
以選擇「
Execute
」，然後按下
搖桿
。
• 要結束，可使用
搖桿
選擇
「Exit」
，然後按下
搖桿
。
7.
向右或向左移動
搖桿
以選擇
「Yes」
，然後按下
搖桿
。
•
表明正在終結光碟的訊息將會出現。
警告
在終結期間，不可撞擊或振動您的 DVD 攝錄放影機。否則可能
會使其發生故障。
• 此結終功能在電池電量低於 ( ) 時不可用。
• 終結後，無法刪除或編輯光碟中的影片影像或播放清單。
• 終結所需的時間可能會因光碟類型而異。
• 請參閱第 8 頁以獲得有關終結光碟相容性的資訊。
• 不能保證在所有 DVD 播放機/ 攝錄放影機/ 磁碟機
中都能播放。有關相容性的詳細資訊，請參閱您的
DVD
播放機/攝錄放影機/ 磁碟機使用者手冊。
• 終結 DVD-R/+R DL 光碟後，您無法在 DVD 攝錄放影機中
重新錄製。
• 無需終結便可在其他裝置上播放 DVD+RW 光碟。
• 終結後，未經取消終結便無法在 DVD-RW 光碟上進行其他
錄製。
STBY 0:00:00 [30 min]
Disc Manage
Disc Finalise
Disc Unfi nalise
Disc Format
Disc Info
Now Finalising...
Avoid Shock & Vibration
Finalise
DVD needs to fi nalise for other DVD
player or recorder to be played.
But no more recording is allowed after
fi nalising.
Next
Back
Finalise
Disc Name 01/JAN/2008
Disc Type DVD-RW [Unfi nalised]
Disc Format VR Mode
Used 0:10:00
Free 0:20:00 [Fine]
Exit
Execute Rename
Eng+Tai_VP.indb 47 2008-03-07 ¿ÀÈÄ 6:24:40