Filter
Top Products
46_ English
• Adjust the sound volume on the TV.
• The remote control is useful when operating the HD camcorder while viewing an image on a TV screen.
• Information that the HD camcorder is recording will appear on the TV screen: You can switch between the
on-screen information display modes. Refer to “Switching the information display mode” and press the
Display ( )/
i
CHECK button to switch the display status.
page 22
DUBBING IMAGES ON A VCR OR DVD/HDD RECORDER
• You can dub images played back on this HD camcorder, onto
a VCR or DVD/HDD recorder.
• Refer to “editing movie images” to create a playlist by selecting
desired scenes from those recorded on this HD camcorder.
page 75
• Use the provided multi-av cable to connect the HD
camcorder to the other AV device.
• If the connected AV device has an S-Video output jack, you
can connect the S-Video jack of Multi-AV cable.
1. Press the MODE button to set Play ( ).
2. Choose the desired image to be dubbed, then press the record button on the connected device.
• The HD camcorder will start playback and the recording device will dub it.
• Using S-Video will deliver clear images.
• Be sure to use the AC power adaptor to power the HD camcorder to prevent battery power from shutting
off during recording on another video device.
Choose the desired image to be dubbed, then press the record button on the connected device.
S-VIDEO IN
L R
AUDIO INVIDEO IN
Signal flow
Multi-AV cable
HD Camcorder
VCR or DVD/HDD
recorder
or
connection