Filter
Top Products
Getting Started 15
Taking your First Photo
English
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after a pre-defined delay.
The burst photography feature allows you to take multiple consecutive photos by pressing and holding
the Shutter button. The multi-burst photography feature allows you to take multiple (16) consecutive
VGA photos by pressing the Shutter button once.
To set the self-timer/burst mode:
1. Press the Right/ Self-timer/ Burst Mode navigation button to cycle through the self-
timer ( or ) and burst photography options ( or ) on the LCD screen.
2. Once you have selected an option, frame and take your shot. In self-timer mode, the icon will
flash until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use these functions for the
next photo, press the Right/ Self-timer/ Burst Mode navigation button again to
activate the function.
Using Auto Scene Mode
When Auto Scene mode is enabled, the camera will automatically
detect the proper scene modes you may want to switch, such as Auto,
Backlight, Macro, Copy, Landscape, Night Landscape, Portrait, Foliage,
Night Portrait. However, the image resolution and quality, and the
exposure compensation are still controllable in this function.
1. Turn Mode Dial to Auto Scene mode.
2. The detected scene icon will be displayed on the LCD.
Note:
: Burst Mode
Take photos until shutter is released.
: Multi-Burst Mode
16 photos continuously by 1 press of the Shutter button.
9999
9999
9999
12M
12M