Sanyo VPC-HD1 Digital Camera User Manual


 
English 122
3 Select “CHANGE SETTINGS”, and
press the SET button.
h The screen to change the settings
appears.
4 Toggle the SET button up or down
to select the desired setting, and
press the SET button.
h The screen to select operation
sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 6 different sounds (A to F).
h You can press the still image shooting button to preview the
selected operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
<If “OPERATION VOL” was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
(maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
5 Select “EXIT”, and press the SET button.
h The operation sound settings are completed.
HINT
iIf you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.
AUDIO GUIDE
OPERATION VOL
EXIT
KEY SW
SHUTTER
TURN ON/OFF
ON
4
A
D
ON
OPERATION BEEP