Sanyo VPC-HD1 Digital Camera User Manual


 
75 English
EXPOSURE SETTING
3 Select the desired icon from the
manual exposure menu, and press
the SET button.
<If T, g or , was selected>
1 Toggle the SET button up or down
to select ND filter, aperture value
or shutter speed.
2 Toggle the SET button left or right
to change the setting for the
selected parameter.
4 Press the SET button.
h This completes the exposure
setting.
HINT
iTo prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
iA slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
iTo minimize noise in the image, enable the noise reduction function
(page 126).
iThe manual exposure setting automatically becomes @ if the scene
select function is active or if the mode is set to the AE shift sequential shots
mode.
iIn the sequential shots mode, the shutter speed is faster than 1/15 sec.
iWhen a video clip is recorded in a video mode other than T with the
shutter speed set to slower than 1/29 sec., the shutter speed during
recording is 1/30 sec. And when a video clip is recorded in the T video
mode with the shutter speed set to slower than 1/59 sec., the shutter
speed during recording is 1/60 sec.
iIf the exposure setting is
, and the ISO sensitivity set is other than t
(page 83), the exposure correction setting will be disabled.
F3.5
1/1500
Shutter speed
Aperture
ND filter