Sanyo VPC-HD1 Digital Camera User Manual


 
41 English
BEFORE TAKING PICTURES
iFast-moving subjects
Use the focus-lock function to lock the
focus on an object at the same distance as
the desired subject, then reposition the
camera to compose the picture.
Hints for taking pictures
Muting the operation sounds
iThe operation sounds that are generated, for example, when the still image
shooting button, MENU button or SET button is pressed, as well as the
audio guidance when you switch the mode, can be muted (page 121).
Where is the image and audio data saved?
iAll the image and sound data is recorded on the card installed in the
camera.
Taking pictures in backlight conditions...
iWhen taking pictures with the light coming from behind the subject, due to
the characteristics of the lens, light lines or ghost patterns (flare
phenomenon) may appear in the captured image. In this situation, it is
recommended that you avoid taking pictures with the subject lit from behind.
While the image data is being recorded...
iWhile the multi-indicator is flashing red, the image data is being written to
the memory, during which time it is not possible to capture another image.
Another image can be captured after the flashing red indicator turns off.
However, even when the multi-indicator is flashing red, depending on the
camera’s internal memory remaining capacity, in some cases the next
image can be captured about 2 seconds after shooting.
Checking the last image shot (instant review)
iAfter shooting a picture, you can immediately view it by pressing the SET
button once.
iDuring instant review of a video clip, normal play, reverse play and pause,
etc. are available (page 44).
iIf you wish to delete the image (for a video clip, it must be in the pause or
stop mode), toggle the SET button up to access the delete function.
iYou can view other images while the instant review display is showing by
toggling the SET button to the left or right.
iCancel the instant review display by toggling the SET button down.