Sanyo VPC-HD1 Digital Camera User Manual


 
61 English
SHOOTING WITH THE FLASH
The flash is used not only for taking pictures where there is insufficient light,
but also when the subject is in shade or in backlight conditions. Your camera’s
flash has four modes of operation (automatic flash mode, forced flash mode,
flash off mode, and red-eye reduction mode). Select the flash mode that is
appropriate for the surrounding conditions. The flash can be enabled only
when taking single-shot still images.
1 Set the main switch to REC.
2 Press the flash button to
extend the flash.
h The flash setting appears
on the monitor.
No flash indication:
The camera will detect
the subject brightness
and use the flash only
when required. In a
backlight situation, if only
the center of the image is
very dark, the flash will
operate to compensate
(auto flash).
12 00:00:15
F3.5
1/40
Flash button
Flash setting