INSTALLING AND REMOVING THE CARDS
The images and audio recordings recorded by your digital camera are stored on the data storage
card installed in the digital camera. You must install a card before you can capture images. For
more information on handling the cards, see “Cautions when handling the CompactFlash or
microdrive” on page 12 and “Cautions when using the microdrive” on page 131. Before using the
supplied CompactFlash card or an unused card, format it using the digital camera (see page 118).
Installing a Card
1 Set the main switch to “MONITOR OFF” or
“CAMERA.”
2 Close the lens cover.
3 Make sure the power is turned off, then open the
card slot cover on the bottom of the digital
camera.
4 Insert the card.
Make sure the contacts are facing downward and
insert the card in the direction shown by the arrow
(l mark).
Be sure to insert the card all the way until it is fully
inserted.
5 Push down the eject button and close the card
slot cover.
When a card is inserted, the eject button will stand
up. Push down the eject button in the direction
indicated by the arrow.
PLAY CAMERA
MONITOR OFF
Main switch
Card slot cover
Eject button
25 English