Filter
Top Products
English
12
DANGER
i
ii
i Cautions when plugging in
e Securely plug the power cord all the way into the power
outlet. If the docking station or AC adapter/charger is used
with the power cord not fully plugged in, heat may be
generated and cause a fire.
e Do not use if the power cord is damaged or cannot be
correctly plugged into the power outlet. Using in this
condition may cause a fire or electric shock.
e Do not allow dust, etc., to build up on the power cord or
power outlet. A build-up of dust may cause a short circuit
or generate heat and cause a fire.
e When unplugging the power cord, be sure to hold the plug
part and slowly pull it out of the power outlet. Pulling the
cord portion may damage the power cord and cause a fire
or electric shock.
i
ii
i Do not pull on the power cord to unplug it
e Do not leave the power cord plugged into the power outlet
while the other end is not plugged into the docking station
or AC adapter/charger. The loose end can cause
electrocution if touched with wet hands or if handled by
children.
e Use only the supplied power cord. If a different power
cord is used, it may be rated for a different current load,
and that may cause a fire.
e The supplied power cord is for exclusive use with the
devices supplied with your camera. Do not use it with
other devices, as doing so may cause a fire or electric
shock.
e Do not use a bundled power cord, as the heat generated
may cause a fire.
e When using an extension cord, make sure that the total
wattage of the connected devices does not exceed the
rated value of the extension cord. If the power load
exceeds the rated value, it may cause a fire.