Filter
Top Products
159
English
Shoot-
ing
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical zoom
has moved to the
maximum
magnification
position.
Not a malfunction.
Release the zoom
switch, and press it
again.
61
There is noise
in the captured
image.
The ISO sensitivity
setting is too high.
Set the ISO
sensitivity to a lower
setting.
84
LCD
monitor
No playback
image appears.
The main switch is
not set to PLAY.
Set the main switch
to PLAY.
64
View-
ing
images
The image is
too dark.
The flash was
blocked by a finger
or other object.
Hold the camera
correctly, and make
sure the flash is not
obstructed.
44
The subject was too
far away.
Capture the image in
the range of
operation of the flash.
165
The subject was lit
from behind.
Use the forced flash
mode.
60
Use the exposure
correction function.
86
There is not enough
light.
Adjust the ISO
sensitivity setting.
84
The video clip
picture is
flickering.
The video clip was
filmed under
fluorescent lighting.
Set the flicker-
reduction setting to
on.
83
The image is
too bright.
The forced flash
mode is selected.
Select a different
flash mode.
60
The subject was too
bright.
Use the exposure
correction function.
86
The ISO sensitivity
setting is incorrect.
Set the ISO
sensitivity to t.
84
Problem Cause Action
Refer-
ence
page
TROUBLESHOOTING