Sanyo VPC-C1EX Camcorder User Manual


 
English
50
Note
About the target mark
e The target mark indicates the position which is currently focused. If the target
mark does not appear, or if it appears at a position that is different from the
point you wish to focus, you can refocus, for example, by changing the
shooting angle.
e The large target mark appears when the camera focuses on a wide area in
the center of the screen.
HINT
Shoot a still image while recording a video clip
e If you press the still image shooting button while recording a video clip, the
frame is also saved as a still image. Note, however, that in this case the flash
will not operate.
e If the still image resolution is set to a setting other than [, and you press
the still image shooting button while recording a video clip, the displayed
image stops briefly and then returns to video clip recording after the still
image is captured.
Note
e The data for a video clip is very large. Therefore, be aware that if the video
clip is uploaded to a computer to be played back, the computer may not be
able to play back the video fast enough, making it appear jerky. (The video
will always be displayed properly on the LCD monitor or a television.)
e Depending on the card, shooting may end even before the possible shooting
time indicated on page 167.