Filter
Top Products
English
160
View-
ing
images
The image is
not in focus.
The subject is too
close to the camera.
Select the correct
focus setting for your
needs.
82
The focus setting is
not correct.
The camera moved
when the still image
shooting button was
pressed.
Hold the camera
correctly and slowly
press the still image
shooting button
halfway to lock the
focus. Then press the
still image shooting
button all the way to
capture the image.
44,
48
The focus is not
locked properly.
The lens is dirty. Clean the lens. 22
The colors of
the images
captured
indoors are not
correct.
This is due to
ambient lighting.
Capture the image
using the forced flash
mode.
60
The white balance
setting is incorrect.
Set the white balance
setting correctly.
85
A part of the
image is
missing.
The handstrap or a
finger was blocking
the lens or lens
opening.
Hold the camera
correctly, and make
sure the lens is not
obstructed.
44
“NO IMAGE” is
shown.
There is no recorded
data for the selected
playback mode.
Play back after
capturing images or
making audio
recordings.
47
During audio
playback, there
is no sound.
The volume setting
on the camera is too
low.
Select the volume
icon Z and adjust
the volume.
71
Problem Cause Action
Refer-
ence
page