Filter
Top Products
35 English
TURNING THE CAMERA ON AND OFF
Turning on the camera when the power save
(sleep) mode is active
In order to preserve battery pack power, the power save (sleep) function
will automatically turn off the camera after 1 minute of no use during
shooting, or 5 minutes of no use during playback (factory-preset
setting).
iWhen the power save mode is active, you can restore the power by any of
the following methods:
h Move the main switch.
h Press the ON/OFF button.
h Press the still image shooting/video clip recording button.
h Press the SET or MENU button.
h Press the zoom switch.
h Press the flash button [?].
h Press the HD/NORM button.
h Press the HIGH SENSITIVITY button.
iAfter the power save mode has been active for about 1 hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
iWhen the AC adaptor is connected, the power save mode will become
active about 10 minutes after the camera is turned on (factory-preset
setting).
iThe user can specify the time elapsed before the power save mode is
activated (page 149).
iWhen the camera is connected to a computer or printer, the power save
mode becomes active after about 12 hours.
Turning off the camera
1 Press the ON/OFF button for at least 1 second.
h The camera turns off.