Filter
Top Products
51 English
CAPTURING AND PLAYING BACK STILL IMAGES
HINT
What is the camera focusing on?
iA target mark & on the monitor shows
the area the camera is focusing on.
iThe camera automatically determines
the correct focus by measuring from 9
different focus points within the
shooting area. If the target mark is at a
position that is different from the point
you wish to focus on, you can refocus,
for example, by changing the shooting
angle.
iThe large target mark appears when
the camera focuses on a wide area in
the center of the screen.
The shutter speed and aperture are
displayed
iWhen the camera focuses and the
target mark appears, at the same time,
the shutter speed and aperture
settings are also displayed. You can
use them as a reference when
shooting.
If the camera shake icon > appears...
iDuring still image shooting, if the
shutter speed is slow and the
possibility that the image may be
blurred due to camera shake becomes
high, the camera shake icon may
appear on the monitor. In this case,
use a tripod to stabilize the camera
when shooting, or set the flash
operation mode to automatic
(page 66).
iWhen shooting with the scene select
function set to the fireworks +
mode, the camera shake icon always
appears, but this is normal.
F3.5
1/40
Shutter speed
Aperture
Target mark