Sanyo VPC-HD2 Camcorder User Manual


 
133 English
OPERATION SOUNDS
Use this menu to set the confirming audio signals when the camera is turned
on/off or when the operation buttons (still image shooting button, SET button,
MENU button, etc.) are pressed, to adjust the operation sound volume, and to
enable/disable the audio guide.
1 Display the Option Screen (page 128).
2 Select the operation beep icon ?,
and press the SET button.
h The Operation Beep Setting Screen
appears.
h The current settings are shown on
the screen.
h If “ALL OFF” is selected and the
SET button pressed, all the
operation sounds are muted.
h If the MENU button is pressed, you
are returned to the Option Screen.
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned
on or off.
SHUTTER:
Select the sound that is produced
when the still image shooting button
is pressed, or when a photo is taken
using the self-timer.
KEY SW:
Select the sound that is produced
when the SET button, MENU button,
etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio
help guide.
OK
ALL OFF
CHANGE SETTINGS
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF
:
ON
:
D
:
A
:
ON
OPERATION BEEP