Filter
Top Products
Getting Started >>
16
To prevent valuable data from
being accidentally erased from
an SD/SDHC memory card, you
can slide the write protect tab (on
the side of the SD/SDHC memory
card) to “LOCK”.
To save, edit, or erase data on an
SD/SDHC memory card, you must unlock the card.
To prevent damaging of an SD/SDHC memory card, be sure to turn off
the power when inserting or removing the SD/SDHC memory card. If
inserting or removing the SD/SDHC memory card with the power on,
the camera will automatically turn off.
NOTE
Charging the Battery
The AC power adapter will charge the battery or operate as the camera’s power
supply. Make sure that the camera is turned off and the battery is inserted
before charging.
1. Insert one end of the AC power adapter into the DC IN 5V terminal of the
camera.
2. Insert the other end of the AC power
adapter into a wall outlet.
The status LED lights red when
charging has started and the
LED turns off when charging
is completed. The LED lights
green when a charging error has
occurred or no battery is inserted
inside the camera.
It is recommended that you fully discharge the battery through normal
use before recharging.
Charging time varies according to the ambient temperature and the
status of battery.
This camera must use with the specified battery and AC power adapter
for battery charging. Damage caused by using of an incorrect adapter is
not covered under the warranty.
The battery may feel warm after it has been charged or immediately after
being used. This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery
warm by holding them inside your outer clothing.
NOTE