Filter
Top Products
Getting Started >>
17
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for
an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow
these steps to set the correct date and time.
1. Slide the mode switch to [
] or [ ],
and press the
MENU button.
2. Select [Setup] with the
button.
3. Select [Date/Time] with the
/
buttons, and press the
SET button.
Select the item’s field with the /
buttons and adjust the value for
the date and time with the
/
buttons.
The time is displayed in 24-hour
format.
After confirming all settings are
correct, press the
SET button.
4. To exit from the [Setup] menu, press the
MENU button.
SET:Adj.
SET:Enter