19
Muting the transmitters
Both transmitters have a MUTE switch that noiselessly mutes the
transmitter’s audio signal without switching the transmitter off.
Muting the SK 300 G2 bodypack transmitter
̈ Set the MUTE switch Ƹ to the position ’MUTE’. The “MUTE” display
appears on the transmitter display panel. Provided that the pilot tone
function is activated on both the transmitter and the receiver, the “MUTE”
display also appears on the receiver display panel.
̈ Set the MUTE switch back to the original position to retransmit the audio
signal.
Muting the SKM 300 G2 radiomicrophone
̈ Turn the protective cap ¶ at the bottom of the radiomicrophone so that
the MUTE switch Ƹ becomes accessible.
̈ Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears
on the transmitter display panel. Provided that the pilot tone function is
activated on both the transmitter and the receiver, the “MUTE” display
also appears on the receiver display panel.
̈ Set the MUTE switch back to the original position to retransmit the audio
signal.
Activating/deactivating the lock mode
ew 300 G2 transmitters and receivers have a lock mode that can be activated
or deactivated via the operating menu (see “Activating/deactivating the lock
mode“ on page 34). The lock mode prevents that the transmitter or receiver
is accidentally programmed or switched off during operation.
Ƹ
¶
Ƹ