Sharp VL-NZ100U Camcorder User Manual


 
Preparation
Preparation
15
Selecting the Language
for the On-screen
Display
Available modes:
TAPE-CAMERA, CARD-CAMERA
This camcorder allows you to choose English,
French or Spanish as the on-screen display
language.
Setting
When using the camcorder for the first time,
select your on-screen display language by
following the steps below.
1 Hold down the Lock button and set the
Power switch to CAMERA.
The language selection screen appears.
2 Press l or m on the operation button
to select the desired language, then
press the SET button.
Changing
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2 Press l or m on the operation button
to select I, then press the SET button.
3 Press l or m to select “LANGUAGE”
(“LANGUE” or “IDIOMA”), then press the
SET button.
The language selection screen appears.
4 Press l or m to select the desired
language, then press the SET button.
The menu screen displays in the
language selected.
5 Press the MENU button to turn off the
menu screen.
Note:
• The operation procedures in the following
sections are based on using the English on-
screen displays.
ENGLISH
LANGUAGE
FRAN
Ç
AIS
ESPA
Ñ
OL
AUTO
ENGLISH
LANGUAGE
FRAN
Ç
AIS
ESPA
Ñ OL
ENGLISH
OTHERS
BEEP
TIME CODE
TC OUT
DEMO
LANGUAGE
RETURN
MODE
ENGLISH
IDIOMA
FRAN
Ç
AIS
ESPA
Ñ
OL
OTROS
PITIDO
C
Ó
D. TIEMPO
SAL IDA CT
M
ODO
IDIOMA
RETORNO
DEMO.
ESPA
Ñ
OL
Operation button
SET button
Power switch
MENU button