Sharp VL-NZ100U Camcorder User Manual


 
Useful Features
30
Gain-up
Available modes:
TAPE-CAMERA, CARD-CAMERA
When you are recording in a dark or poorly
illuminated location, “LIGHT” is displayed on
the screen. Use the gain-up function to record
a brighter picture.
Note:
• At locations where lighting is adequate, “LIGHT”
will not appear. The gain-up function cannot be
used in this case.
In TAPE-CAMERA or CARD-CAMERA mode,
press the GAMMA/BRIGHTER button once.
“GAMMA” appears, indicating that the gain-
up function is now working.
To obtain a brighter picture
Press the GAMMA/BRIGHTER button again.
The e indicator appears.
To cancel the gain-up function
Press the GAMMA/BRIGHTER button until
“GAMMA” disappears.
Notes:
• You may experience some picture noise in Gain-
up mode, which increases when the e
displays.
• When the e indicator displays, you may get
a shadow image behind a subject that is moving
around a lot.
• Fine brightness adjustments are possible when
using manual exposure (see page 43).
• Gain-up will cancel if you aim the camcorder in a
bright location.
AUTO
30
min
AUTO
30
min
AUTO
30
min
AUTO
30
min
GAMMAGAMMA
L I GHTLIGHT
L I GHTLIGHT
GAMMA
AUTO
30
min
GAMMA/BRIGHTER
button