Sharp VL-Z300E Camcorder User Manual


 
Preparation
17
Closing the viewfinder
Push in the viewfinder completely.
Notes:
Do not use excessive force when moving
the viewfinder.
Do not pick up the camcorder by the
viewfinder.
• The viewfinder automatically turns off when
the LCD monitor is opened. If the vertical
rotation of the monitor is 180° when Camera
mode, however, the viewfinder is on and the
subject is displayed both in the viewfinder
and on the monitor (see page 38).
• You can adjust the settings on the MENU
screen through the viewfinder by using the
Operation button (see page 28 for use of the
Operation button).
• Be sure to close the viewfinder after use.
Adjusting the dioptre
Adjust the dioptre according to your
eyesight when the picture in the viewfinder
or the characters on the on-screen display
is not clear.
1 Pull out the viewfinder completely.
2 Hold down the Lock button and set
the Power switch to v.
3 While looking through the viewfinder,
turn the dioptre adjustment dial until
the indicators in the viewfinder are
clearly visible.
Note:
• For cleaning the viewfinder, see page 73.
Dioptre adjustment dial
VL-Z300E/VL-Z100E-E-005-019 04.2.16, 8:31 AM17