Sharp VL-Z300E Camcorder User Manual


 
Useful Features
Playback
Useful Features
42
Using the Remote
Control
(Not Supplied)
The remote control (RRMCGA237WJSA) is
not supplied with this camcorder. Contact
the nearest SHARP service centre or your
dealer for purchasing as specified part.
Activating
• The example screens shown are for
Playback mode.
1 Press the MENU button to display the
menu screen.
2 Press l or m on the Operation
button to select Z, then press the
centre of the Operation button.
3 Press l or m to select “REMOTE”,
then press the centre of the Operation
button.
* “S-VIDEO IN” does not appear with
VL-Z100.
4 Press l or m to select “ON”, then
press the centre of the Operation
button.
5 Press the MENU button to turn off the
menu screen.
Useful Features
Playback
Operating
Aim the remote control at the remote sensor
of the camcorder, and press the control
buttons to operate.
OTHERS 1
BEEP
REMOTE
DEFAULT
S-VIDEO IN
RETURN
ON
OFF
REMOTE
ON
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as
this may prevent the remote control from
operating properly.
• Be sure that there are no obstacles between
the remote control and the remote sensor.
• The buttons with an asterisk mark (*) do not
work with this camcorder.
*
ZOOM (W/T) buttons
SLOW button
Remote sensor
5 m
* CARD PLAY/MULTI
button
Advance/reverse
buttons
* Shift buttons
VOLUME +/L
buttons
PLAY/STILL button
FF button
* CARD REC button
TAPE REC START/STOP button
STOP button
REW button
DATE button
T/C (Time Code)
button
VL-Z300E/VL-Z100E-E-042-046 04.2.16, 8:33 AM42