Sharp VL-Z300E Camcorder User Manual


 
Advanced Features
59
Audio Dubbing
1 Play back the Mini DV cassette
recorded in SP mode and locate the
tape position where you wish to start
audio dubbing.
2 Press m on the Operation button to
pause playback.
3 Press the DISPLAY/MODE SET
button until the mode screen appears.
4 Press l or m to select “AUDIO
DUB”, then press the centre of the
Operation button.
The audio dubbing screen appears.
5 Press m to begin audio dubbing.
Record your narration.
To pause audio dubbing
Press l. To resume audio dubbing, press
m again.
To cancel audio dubbing
Press the centre of the Operation button in
step 4. The audio dubbing screen disap-
pears.
If you wish to change the
dubbed audio or dub addi-
tional scenes
1 Press the DISPLAY/MODE SET
button to turn off the audio dubbing
screen.
2 Repeat steps 1 to 5 above.
Notes:
It is recommended that you use Audio
Dubbing only with recordings made with this
camcorder. Use of recordings made with
other digital video equipment may result in
poor audio quality.
Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to
16-bit mode or vice versa. Press m to
resume operation.
Audio dubbing will automatically stop if a
portion recorded in LP mode or an unre-
corded portion of the tape is encountered.
You can play back the dubbed audio and the
original audio together or separately (see
page 60).
“AUDIO DUB” cannot be selected when the
Mini DV cassette is recorded in LP mode.
EXECUTE
AUDIO DUB
STRETCH PB
PIC.EFFECT
AUDIO
AUDIO DUB
21
+
START STOP CANCEL
00:00:0
TC
VL-Z300E/VL-Z100E-E-057-066 04.2.16, 8:34 AM59