Sharp VL-Z300E Camcorder User Manual


 
Advanced Features
Camera Recording
Advanced Features
50
Locking
1 Select “LOCK MODE” in step 4 in
“Selecting” on the previous page.
2 Aim the lens at a white object.
Adjust the distance of the object so
that the entire screen is white.
3 Press the centre of the Operation
button to set the white balance lock.
“LOCK MODE” will change to
“LOCK” after pressing the centre of
the Operation button.
“LOCK” flashes during the locking
procedure, and stops flashing after
locking the white balance.
Note:
If you move the camcorder while
“LOCK” is flashing, “LOCK” may not
stop flashing. If this occurs, repeat
step 3.
4 Press the DISPLAY/MODE SET
button to turn off the MANUAL SET
screen.
To return to Auto White Balance
mode
Press j in step 4 in “Selecting” on the
previous page or step 3 in “Locking” to
display “AUTO”.
To return to Full Auto mode
Set the camcorder to Full Auto mode (see
page 54).
Note:
White Balance setting cannot be used
when a scene setting is selected.
White paper or white cloth
VL-Z300E/VL-Z100E-E-047-056 04.2.16, 8:34 AM50