Filter
Top Products
Table of
contents
Operation
Search
HOME/MENU
Search
Index
127
GB
Viewing an image on a SD TV
(DSC-T90)
For details on the operation of this function for DSC-T900, see pages 121 to 126.
You can view images recorded on the camera in standard picture quality by connecting the
camera to an SD (Standard Definition) TV. The connection varies according to the type of TV
the camera is connected to. See “TV TYPE” (page 69). Refer also to the operating instructions
supplied with the TV.
1 Turn off both the camera and the TV.
2 Connect the camera to the TV with the cable for multi-use terminal
(supplied).
3 Turn on the TV and set the input.
4 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Touch / displayed on the LCD screen of
this camera to select the desired image.
• When the audio input jacks of the TV are stereophonic, connect the audio plug (black) of the cable for
multi-use terminal to the left audio jack.
• When you play back a single image, no icons are displayed on the TV.
• When you shoot movies while the camera and a TV are connected using the cable for multi-use terminal
(supplied), the image being shot is not displayed on the TV.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 68).
Notes
Cable for multi-use terminal
(supplied)
2 To the multi connector
AUDIO
(Playback) button
VIDEO
BlackYellow
1 To audio/video input jacks