Filter
Top Products
27
Playback – Basics
Viewing the recording on TV
Connect your camcorder to your TV or VCR with the A/V connecting cable supplied
with your camcorder to watch the playback picture on the TV screen. You can operate
the playback control buttons in the same way as when you monitor playback pictures
on the LCD screen. When monitoring the playback picture on the TV screen, we
recommend that you power your camcorder from a wall outlet using the AC power
adaptor (p. 14). Refer to the operating instructions of your TV or VCR.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/VCR selector on the TV to VCR.
CCD-TRV17/TRV37/TRV57/TRV67
* CCD-TRV67 only
CCD-TRV87
If your TV is already connected to a VCR
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
: Signal flow
S VIDEO*
VIDEO OUT
AUDIO OUT
VIDEO
AUDIO
IN
S VIDEO
S VIDEO
VIDEO
AUDIO
IN
VIDEO
AUDIO
: Signal flow
CCD-TRV67