Filter
Top Products
52
— Editing —
Dubbing a tape
Using the A/V connecting cable or S video connecting cable
(not supplied)
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to LINE.
Refer to the operating instructions of your VCR for more information.
(3) Set the POWER switch to VTR (CCD-TRV87) or PLAYER (CCD-TRV17/
TRV37/TRV57/TRV67).
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
CCD-TRV17/TRV37/TRV57/TRV67
* CCD-TRV67 only
CCD-TRV87
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures from dubbing
Set EDIT to ON in the menu settings before dubbing.
: Signal flow
S VIDEO*
VIDEO
AUDIO
IN
VIDEO OUT
AUDIO OUT
AUDIO
AUDIO
VIDEO
VIDEO
S VIDEO
S VIDEO
IN
: Signal flow
CCD-TRV67