Filter
Top Products
29
Playback – Basics
To cancel the super laser link function
Press S.LASER LINK. The lamp on the S.LASER LINK button goes out.
If you turn the power off
Super laser link turns off automatically.
If you use a Sony TV
•You can turn on the TV automatically when you press S.LASER LINK or N. To do
so, set AUTO TV ON to ON in the menu settings and turn the TV’s main switch on,
then do either of the following:
–Point the SUPER LASER LINK emitter at the TV’s remote sensor and press S.LASER
LINK.
–Turn on super laser link and press N.
•You can switch the video input of the TV automatically to the one which the AV
cordless IR receiver is connected. To do so, set AUTO TV ON to ON and TV INPUT to
the same video input (1, 2, 3) in the menu settings. With some models, however, the
picture and sound may be disconnected momentarily when the video input is
switched.
•The above feature may not work on some TV models.
Note
When super laser link is activated (the S.LASER LINK button is lit), your camcorder
consumes power. Press S.LASER LINK to turn off the super laser link function when it
is not needed.
Viewing the recording on TV