Filter
Top Products
10-GB
Charging the battery pack
1 Open the battery/“Memory Stick” cover of the camera.
2 Install the battery pack into the camera, then close the battery/
“Memory Stick” cover.
3 Connect the AC adaptor to the DC IN jack of the Cyber-shot Station.
Connect the power cord (mains lead) to the AC adaptor and to a wall
outlet (wall socket).
– You must use either the AC adaptor (AC-LS5/LS5B) comes with the
Cyber-shot, or an optional AC adaptor (AC-LS5).
– Do not short the DC plug of the AC adaptor with a metalic object, as this
may cause a malfunction.
4 Place the camera on the Cyber-shot Station.
Charging starts automatically. Both the
/CHG lamp of the camera and the
CHARGE lamps of the Cyber-shot Station light up.
While charging, the CHARGE lamps of the Cyber-shot Station light up one
by one, from the left to the right. When charging is completed, the
/CHG
lamp of the camera and the CHARGE lamps of the Cyber-shot Station go off.
Note: The CHARGE lamps do not indicate the charging level of the battery.
– When charging the battery pack, make sure the camera is turned off.
– Make sure the camera is securely attached to the Cyber-shot Station.