Filter
Top Products
104
Labeling a cassette
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write-protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because the memory is full. In this case, delete
data you do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to 4 titles also appear.
When the “-----” indicator has fewer than 10 spaces
The cassette memory is full.
The “-----” indicates the number of characters you can select for the label.
To erase the title
Press C. The last character is erased.
To enter a space
Press c.
To enter the same character on the same button in succession
Press c to move the cursor to the next position, and enter the character.
Deleting all the data in cassette memory
You can delete all the data in cassette memory at once.
(1) Set the POWER switch to CAMERA or VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then select ERASE ALL in
in the menu settings, then select
OK.
(4) Select EXECUTE and then press EXEC. “ERASING” appears on the screen.
Once deleting is completed, “COMPLETE” is displayed.
To return to FN
Press EXIT.
To cancel deleting
Select RETURN in step 3 or step 4, then press EXEC.