Filter
Top Products
139
“Memory Stick” Operations
Superimposing a still image in a “Memory Stick” on a moving
picture – MEMORY MIX
Items to adjust
M. CHROM The color (blue) scheme of the area in the still image which is to be
swapped with a moving picture
M. LUMI The color (bright) scheme of the area in the still image which is to be
swapped with a moving picture
C. CHROM The color (blue) scheme of the area in the moving picture which is to be
swapped with a still image
The fewer bars there are on the screen, the stronger the effect.
To change the still image to be superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
Notes
•You cannot use MEMORY MIX function for moving pictures recorded on “Memory
Stick”s.
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•You cannot reselect the mode. Press OFF again to return to PAGE2.
The “Memory Stick” supplied with your camcorder stores 20 images
–For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
–For C. CHROM: 2 images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 155).
Image data modified with your computers or shot with other equipment
You may not be able to play them back with your camcorder.
To record a still image without any effect on a tape
Press –/+ on the left corner to increase the bars to maximum in the M. LUMI mode in
step 6.
When recording images on a “Memory Stick” using the MEMORY MIX function
The PROGRAM AE function does not work.