Filter
Top Products
28
Recording a picture
Indicators displayed in the recording mode
The indicators are not recorded on tape.
Remaining battery time indicator
The remaining battery time indicator roughly indicates the recording time. The
indicator may not be correct, depending on the conditions in which you are recording.
When you close the LCD panel and open it again, it takes about one minute for the
correct remaining battery time in minutes to be displayed.
Time code
The time code indicates the recording or playback time, “0:00:00” (hours : minutes :
seconds) in CAMERA mode and “0:00:00:00” (hours : minutes : seconds : frames) in
VCR mode. You cannot rewrite only the time code.
Remaining tape indicator
The indicator may not be displayed accurately depending on the tape.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
while recording. However, they are recorded automatically onto the tape. To display
the recording data, press DATA CODE during playback. You can also use the Remote
Commander for this operation (p. 36).
Cassette memory indicator
This appears when using a tape with cassette memory.
Remaining battery time indicator
0:00:01
45min
40
min
REC
FN
/ –
+
EDIT
JUL 4 2001 12 : 05 : 56 AM
STBY/REC indicator
Remaining tape indicator
This appears after you insert a cassette and record or play back for a while.
Time code/Tape counter indicator
Recording mode indicator
FN button
Press this button to display operation buttons on the LCD screen.
Time indicator
The time is displayed about 5 seconds after the power is turned on.
Date indicator
The date is displayed about 5 seconds after the power is turned on.
EDIT indicator
This appears when you set EDITSEARCH to ON in in the menu
settings.