Filter
Top Products
32
GB
• It is not possible to enlarge an image using the
buttons on the photo frame.
You can rotate an image during single view
mode.
Operate from the menu of the
photo frame
1 Press MENU in single view mode.
2 Press B/b to select the (Editing)
tab.
3 Press v/V to select [Rotate] and
then press .
4 Press v/V to select the direction to
rotate and then press .
•:
Rotates the image 90 degrees
clockwise.
•:
Rotates the image 90 degrees
counterclockwise.
5 Press v/V to select [OK] and then
press .
Tips
• You can also rotate an image with (ROTATE)
on the remote control. The image rotates 90 degrees
counterclockwise every time you press the button.
• For an internal memory image, image rotation data
will be retained even after the power is turned off.
• You can rotate the image of the index image
display.
Changing the settings of
the auto power on/off
function
You can use the timer function to turn the
photo frame on or off automatically when the
photo frame is turned on.
1 Press MENU.
2 Press B/b to select the
(Settings) tab.
3 Press v/V to select [Auto Power ON/
OFF], and press .
The screen used for setting a value for
[Auto Power ON/OFF] is displayed.
4 Press v/V to select [Setup method]
and press . Then, press v/V to
select [Simple] or [Advanced], and
press .
[Simple]:
Sets the auto power on/off function finely
in one minute increments.
[Advanced]:
Sets the auto power on/off function
according to a day of the week by one
hour units.
Rotating an image