Filter
Top Products
20
Changing the screen display
Each time you press v (DISP) on the
control button, the display changes as
follows:
• If you view images in bright outside light, adjust
the brightness of the LCD backlight up.
However, the battery power may decrease faster
under such condition.
• The histogram does not appear in the following
situations:
While shooting
– When the menu is displayed.
– When recording movies.
During playback
– When the menu is displayed.
– In index mode.
– When you are using playback zoom.
– When you are rotating still images.
– During playback of movies.
– When the Favorites List is displayed.
– When the Date List is displayed.
• During image playback, you cannot turn the
LCD screen off.
• A large difference in the histogram displayed
during shooting and playback may occur when:
– The flash strobes.
– The shutter speed is slow or fast.
• The histogram may not appear for images
recorded using other cameras.
• When you set the LCD screen to off, the digital
zoom does not function. When you select
(Flash mode)/ (Self-timer)/ (Macro), the
image is displayed for about two seconds.
• If you turn the power off and on again while the
LCD screen is off, the indicators will be on.
* The brightness of the LCD Backlight is set to
up.
v (DISP) (Screen
display) button
Indicators on
Indicators off*
Indicators on*
Histogram
display
Histogram on* During
playback, the
image
information is
displayed.
LCD screen off